|
TempSensor_NXP_Arduino 1.1.0
Temperature sensor device operation sample code for Arduino
|
This is the complete list of members for PCT2075, including all inherited members.
| bit_op16(uint8_t reg, uint16_t mask, uint16_t value) | PCT2075 | |
| bit_op8(uint8_t reg, uint8_t mask, uint8_t value) | PCT2075 | |
| COMPARATOR enum value | TempSensor | |
| Conf enum value | PCT2075 | |
| INTERRUPT enum value | TempSensor | |
| LM75B(uint8_t i2c_address=(0x90 > > 1)) | LM75B | |
| LM75B(TwoWire &wire, uint8_t i2c_address=(0x90 > > 1)) | LM75B | |
| mode enum name | TempSensor | |
| os_mode(mode flag) | PCT2075 | virtual |
| PCT2075(uint8_t i2c_address=(0x90 > > 1)) | PCT2075 | |
| PCT2075(TwoWire &wire, uint8_t i2c_address=(0x90 > > 1)) | PCT2075 | |
| ping(void) | PCT2075 | |
| read(void) | PCT2075 | virtual |
| read_r16(uint8_t reg) | PCT2075 | |
| read_r8(uint8_t reg) | PCT2075 | |
| reg_num enum name | PCT2075 | |
| reg_r(uint8_t reg_adr, uint8_t *data, uint16_t size) | LM75B | |
| reg_r(uint8_t reg_adr) | LM75B | |
| reg_w(uint8_t reg_adr, const uint8_t *data, uint16_t size) | LM75B | |
| reg_w(uint8_t reg_adr, uint8_t data) | LM75B | |
| temp(void) | PCT2075 | virtual |
| Temp enum value | PCT2075 | |
| TempSensor(uint8_t i2c_address) | TempSensor | |
| TempSensor(TwoWire &wire, uint8_t i2c_address) | TempSensor | |
| thresholds(float v0, float v1) | PCT2075 | virtual |
| Thyst enum value | PCT2075 | |
| Tidle enum value | PCT2075 | |
| Tos enum value | PCT2075 | |
| write_r16(uint8_t reg, uint16_t val) | PCT2075 | |
| write_r8(uint8_t reg, uint8_t val) | PCT2075 | |
| ~LM75B() | LM75B | virtual |
| ~PCT2075() | PCT2075 | virtual |
| ~TempSensor() | TempSensor | virtual |
1.10.0