|
I2C_device_Arduino 1.0.5
An I²C utility class for Arduino
|
This is the complete list of members for test_LM75B, including all inherited members.
| bit_op16(uint8_t reg, uint16_t mask, uint16_t value) | I2C_device | |
| bit_op8(uint8_t reg, uint8_t mask, uint8_t value) | I2C_device | |
| COMPARATOR enum value | test_LM75B | |
| Conf enum value | test_LM75B | |
| i2c | I2C_device | private |
| i2c_addr | I2C_device | private |
| I2C_device(uint8_t i2c_address, bool repeated_start_enable=true) | I2C_device | |
| I2C_device(TwoWire &wire, uint8_t i2c_address, bool repeated_start_enable=true) | I2C_device | |
| INTERRUPT enum value | test_LM75B | |
| mode enum name | test_LM75B | |
| os_mode(const mode flag) | test_LM75B | |
| ping(void) | I2C_device | |
| ping(uint8_t addr) | I2C_device | static |
| read(void) | test_LM75B | |
| read_r16(uint8_t reg) | I2C_device | |
| read_r8(uint8_t reg) | I2C_device | |
| reg_num enum name | test_LM75B | |
| reg_r(uint8_t reg_adr, uint8_t *data, uint16_t size) | I2C_device | |
| reg_r(uint8_t reg_adr) | I2C_device | |
| reg_w(uint8_t reg_adr, const uint8_t *data, uint16_t size) | I2C_device | |
| reg_w(uint8_t reg_adr, uint8_t data) | I2C_device | |
| repeated_start_enable(bool en=true) | I2C_device | |
| rs_dis | I2C_device | private |
| rx(uint8_t *data, uint16_t size) | I2C_device | |
| scan(TwoWire &target_i2c=Wire, uint8_t stop=128) | I2C_device | static |
| Temp enum value | test_LM75B | |
| test_LM75B(const uint8_t i2c_address=(0x90 > > 1)) | test_LM75B | |
| test_LM75B(TwoWire &wire, const uint8_t i2c_address=(0x90 > > 1)) | test_LM75B | |
| thresholds(const float v0, const float v1) | test_LM75B | |
| Thyst enum value | test_LM75B | |
| Tos enum value | test_LM75B | |
| tx(const uint8_t *data, uint16_t size, bool stop=true) | I2C_device | |
| write_r16(uint8_t reg, uint16_t val) | I2C_device | |
| write_r8(uint8_t reg, uint8_t val) | I2C_device | |
| ~I2C_device() | I2C_device | |
| ~test_LM75B() | test_LM75B |
1.10.0